![background image](http://html.mh-extra.com/html/hilti/sfl-14-a/sfl-14-a_operating-instructions-manual_2135538003.webp)
English
1
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of signs used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used in combination with a symbol:
DANGER!
Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING!
Draws attention to a potential hazard that could lead to serious personal injury or
fatality.
CAUTION!
Draws attention to a potentially dangerous situation that could lead to minor personal
injury or damage to the equipment or other property.
1.2.2 Symbols
The following symbols are used in the documentation:
Read the operating instructions before use
General warning
Instructions for use and other useful information
1.2.3 Symbols on the product
The following symbols are used on the product:
Do not look directly into the light source.
1.2.4 Drawings in the illustrations
The illustrations in these operating instructions are intended to promote a better understanding and may
deviate from the actual version of the product.
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions.
The numbering in the illustrations reflects the order of the steps shown in the illustration and may
deviate from the numbering of the steps/operations described in the text.
Item reference numbers are used in the
overview illustration
and refer to the numbers used in
the
product overview
section.
1.3 Product information
Hilti
products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product and its ancillary equipment may present hazards when used incorrectly by
untrained personnel or when used not as directed.
The type designation and serial number are printed on the type identification plate.
▶
Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to enquire about the product.
Printed: 26.10.2016 | Doc-Nr: PUB / 5140725 / 000 / 07
Summary of Contents for SFL 14-A
