Hilti SD 4500-A22, Manual

Page: 16 / 72

10 English 2153708
*2153708*
5.2 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶
Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶
Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.
5.3 Removing the battery
1. Press the release buttons on the battery.
2. Pull the battery out of its holder in the device.
5.4 Fitting the belt hook (optional) 2
The belt hook enables you to attach suitable power tools to your belt. It can
be fitted to allow attachment on the left or right side of the body.
CAUTION
Risk of injury by falling power tools!
▶
Check that the belt hook is fitted securely before beginning work.
1. Fit the belt hook.
2. Attach your power tool to the belt hook.
3. Check that belt hook and power tool are secure.
5.5 Working safely with the belt hook and universal hook
▶
Before beginning work, make sure that the belt hook and universal hook
are securely attached to the screwdriver.
▶
Use the universal hook only when necessary. Lay the screwdriver down
in a safe place when it is not in use for a long period.
5.6 Changing the accessory tool. 3
1. Pull the depth gauge away from the power tool, releasing the snap-on
connection.
2. Push the chuck towards the screwdriver, turning the chuck slightly at the
same time, and then hold it in this position.
3. Remove the accessory tool with your other hand.
4. Insert the desired accessory tool in the chuck, pushing it into the
screwdriver as far as it will go.
Printed: 15.07.2019 | Doc-Nr: PUB / 5295856 / 000 / 02