Hilti SC 70W-A22, Original Operating Instructions

Page: 30 / 228

24 English 2092401
*2092401*
▶
Do not use the product to cut tree branches or trunks.
▶
Use only Hilti Li­ion batteries of the B 22 series with this product.
▶
Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.4 Li­ion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge status of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights. Charge status: 10 % to 25 %
1 LED blinks, the power tool is ready for use. Charge status: < 10 %
1 LED blinks, the power tool is not ready for use. The battery has overheated or is completely dis-
charged.
4 LEDs blink, the power tool is not ready for use. The power tool is overloaded or has overheated.
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
3.5 Fence
The single-arm fence can be used to make accurate cuts along the edge of a workpiece or to rip strips of
equal width.
The fence can be fitted on either side of the base plate.
3.6 Items supplied
Circular saw, saw blade, hex key, fence, vacuum cleaner hose connector, operating instructions (optional:
guide rail adapter)
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Store or online at: www.hilti.group .
3.7 Accessories
Clamping flange, mounting flange, clamping screw.
4 Technical data
4.1 Circular saw
SC 70W­A22
Rated voltage 21.6 V
Weight in accordance with EPTA procedure 01 4.8 kg
Specified blade diameter 190 mm
Saw blade disc thickness 0.7 mm … 1.5 mm
Kerf width
1.5 mm … 2 mm
Saw blade arbor size 30 mm
Rated speed under no load 3,500 /min
Maximum cutting depth at 0°
70 mm
Maximum cutting depth at 45° 51 mm
Maximum cutting depth at 50° 45 mm
Printed: 30.04.2019 | Doc-Nr: PUB / 5206169 / 000 / 03