![background image](http://html1.mh-extra.com/html/hilti/sc-70w-a22/sc-70w-a22_original-operating-instructions_2136160026.webp)
20
English
2092401
*2092401*
▶
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another.
Shorting the battery terminals together may cause burns or a fire.
▶
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
▶
Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
▶
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature
above 130° C (265 °F) may cause explosion.
▶
Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions.
Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Service
▶
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
▶
Never service damaged battery packs.
Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.2
Safety instructions for all saws
Cutting procedures
▶
DANGER: Keep hands away from cutting area and the blade. Keep your second hand on
auxiliary handle or motor housing.
If both hands are holding the saw, they cannot be cut by the blade.
▶
Do not reach underneath the workpiece.
The guard cannot protect you from the blade below the
workpiece.
▶
Adjust the cutting depth to the thickness of the workpiece.
Less than a full tooth of the blade teeth
should be visible below the workpiece.
▶
Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece
to a stable platform.
It is important to support the work properly to minimise body exposure, blade
binding, or loss of control.
▶
Hold the power tool by insulated gripping surfaces, when performing an operation where the
cutting tool may contact hidden wiring.
Contact with a "live" wire will also make exposed metal parts
of the power tool "live" and could give the operator an electric shock.
▶
When ripping, always use a rip fence or straight edge guide.
This improves the accuracy of cut and
reduces the chance of blade binding.
▶
Always use blades with correct size and shape (diamond versus round) of arbour holes.
Blades
that do not match the mounting hardware of the saw will run off-centre, causing loss of control.
▶
Never use damaged or incorrect blade washers or bolt.
The blade washers and bolt were specially
designed for your saw, for optimum performance and safety of operation.
Kickback causes and related warnings
• kickback is a sudden reaction to a pinched, jammed or misaligned saw blade, causing an uncontrolled
saw to lift up and out of the workpiece toward the operator;
• when the blade is pinched or jammed tightly by the kerf closing down, the blade stalls and the motor
reaction drives the unit rapidly back toward the operator;
• if the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the blade can dig
into the top surface of the wood causing the blade to climb out of the kerf and jump back toward the
operator.
Kickback is the result of saw misuse and/or incorrect operating procedures or conditions and can be avoided
by taking proper precautions as given below.
▶
Maintain a firm grip with both hands on the saw and position your arms to resist kickback forces.
Position your body to either side of the blade, but not in line with the blade.
Kickback could cause
the saw to jump backwards, but kickback forces can be controlled by the operator, if proper precautions
are taken.
▶
When blade is binding, or when interrupting a cut for any reason, release the trigger and hold the
saw motionless in the material until the blade comes to a complete stop. Never attempt to remove
the saw from the work or pull the saw backward while the blade is in motion or kickback may
occur.
Investigate and take corrective actions to eliminate the cause of blade binding.
Printed: 30.04.2019 | Doc-Nr: PUB / 5206169 / 000 / 03
Summary of Contents for SC 70W-A22
