![background image](http://html1.mh-extra.com/html/hilti/plt-300/plt-300_original-operating-instructions_2135830019.webp)
14
▶
Wear personal protective equipment, always including protective glasses and protective gloves.
▶
Check the PLT 300 and PLC 300 before use for possible damage.
Have any damage repaired by
Hilti
Service.
▶
Stay alert, watch what you are doing and use common sense when working with the PLT 300. Do
not use the PLT 300 while you are tired or under the influence of drugs, alcohol or medication.
A
moment of inattention while operating the tool may result in serious personal injury.
▶
Operating and storage temperatures must be observed.
▶
When the PLT 300 or PLC 300 is brought into a warm environment from very cold conditions, or
vice-versa, allow it to become acclimatized before use.
▶
Check the accuracy of the PLT 300 after it has been dropped or subjected to other mechanical
stresses.
▶
When a tripod or wall mount is used, check that the PLT 300 is correctly and permanently mounted
and that the tripod is standing securely on solid ground.
▶
Keep the laser exit window clean in order to avoid measurement errors.
▶
Maintain the PLT 300 carefully. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect operation of the PLT 300. If parts are damaged, have
the parts replaced before use of the PLT 300.
Poor maintenance is the cause of many accidents.
▶
Although the PLT 300 is designed for the tough conditions of jobsite use, as with other optical and
electronic instruments (e.g. binoculars, spectacles, cameras) it should be treated with care.
▶
Although the PLT 300 is protected to prevent entry of dampness, it should be wiped dry each time
before being put away in its transport container.
▶
As a precaution, check the previous settings or any adjustments you may have made.
▶
Fasten the battery compartment cover carefully so that the battery doesn’t fall out. If battery
contact is lost the PLT 300 will switch itself off, possibly leading to loss of data.
3 Description
3.1 Overview of the product
3.1.1 PLT 300
1
Key
@
Grip
;
WLAN antenna
=
Battery compartment catch
%
Battery compartment cover
&
Lens cover and laser exit aperture
(
On/off buttons
)
Battery compartment
+
Battery
3.1.2 PLC 300
2
Key
@
Microphone
;
Ambient light sensor
=
Front camera
%
Front camera status indicator
&
Volume control
(
On/off button
)
Display rotation lock button
+
System control button
§
Operating status indicator
/
Data storage status indicator
:
Battery status indicator
∙
Wi-Fi antennas
$
Earphone socket
£
USB connector
|
Docking connector
¡
Charging socket
Q
Rear camera
W
Rear camera status indicator
E
Battery compartment
R
Battery compartment catch
T
microSD card slot
3.2 Intended use
The product described consists of the cordless PLT 300 layout tool and the PLC 300 cordless controller.
The PLC 300 allows remote control of the PLT 300. Both components form a system. The layout tool is
designed to be used for measuring distances and directions, calculating target positions in three dimensions
and laying out given coordinates or values relative to a control line.
▶
Use only
Hilti
Liion batteries of the B 22 series with this product and in the USA and Canada use only
batteries of the B 18 series.
Printed: 03.09.2015 | Doc-Nr: PUB / 5245384 / 000 / 00