Hilti NURTON BX 3-22, Manual

Page: 28 / 356

22 English 2268212
*2268212*
Service
▶
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
▶
Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.2 Tacker safety warnings
▶
Always assume that the tool contains fasteners. Careless handling of the fastening tool can result in
unexpected firing of nails causing personal injury.
▶
Do not point the tool towards yourself or anyone nearby. A nail will be ejected by the tool if it is
triggered unexpectedly, possibly leading to injury.
▶
Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in
contact with the workpiece, the fastener may be deflected away from your target.
▶
Disconnect the tool from the power source when the fastener jams in the tool. While removing a
jammed fastener, the fastening tool may be accidentally activated if it is plugged in.
▶
Use caution while removing a jammed fastener. The mechanism may be under tension and the nail
may be forcefully ejected while attempting to free a jam.
▶
When fastening electrical cables, make sure the cables are not energized. Hold the fastening tool
only by insulated gripping surfaces. Use only fasteners designed for electrical cable installations.
Check that the fastener has not damaged the insulation of the electrical cable. A nail that damages
the insulation of electric cables can lead to electric shock and fire hazards.
2.3 Safety instructions
Requirements to be met by users
▶
Only authorized, appropriately trained persons may operate or service this product.
Personal protective equipment
▶
You and all other persons in the vicinity must wear suitable eye protection, ear protection and a hard hat
while the tool is in use.
Personal safety
▶
Observe the information printed in the operating instructions concerning operation, care and maintenance.
▶
Stay alert, watch what you are doing and use common sense when operating a fastening tool. Do not
use the product when you are tired or under the influence of drugs, alcohol or medication. Take a break if
you experience pain or feel unwell. A moment of inattention while operating the fastening tool can result
in serious injury.
▶
Avoid awkward postures. Make sure you work from a safe stance and stay in balance at all times.
▶
Wear non-skid shoes.
▶
Never pull the fastener guide or fastener back with your hand.
▶
Under certain circumstances, the product could be made ready to fire by pulling the fastener guide
or the fastener back by hand. When the tool is ready to fire, fasteners or the piston could accidentally
be driven into parts of the body.
▶
Keep your arms slightly bent while operating the product (do not straighten your arms).
▶
Keep other people away from the working area, especially children.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶
Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶
Do not look directly into the light source (LEDs) of the power tool and do not aim the beam at other
persons’ faces. Risk of dazzling or eye damage.
Fastening tool use and care
▶
Danger of fasteners penetrating right through! Before driving fasteners, check to make sure that no one
is present behind or below the object into which the fastener is to be driven.
▶
Use the right product for the job. Do not use the product for purposes for which it was not intended. Use
it only as directed and when in faultless condition.
▶
Never leave a loaded product unattended.
▶
Always unload the product (remove fasteners) before cleaning, maintenance, changing the fastener
guide, before work breaks and before storing the product.
▶
When not in use, the product must be unloaded and stored in a locked, dry place where it is inaccessible
to children.