Hilti Nuron SC 30WR-22, Original Operating Instructions, Page: 21 / 112

*2264108*
2264108 English 15
Status Meaning
All LEDs show in sequence, fol-
lowed by one (1) LED showing con-
stantly green.
The battery can remain in use.
All LEDs show in sequence, fol-
lowed by one (1) LED quick-flashing
yellow.
The check to ascertain the battery's
state of health did not complete.
Repeat the procedure, or consult
Hilti Service.
All LEDs show in sequence, fol-
lowed by one (1) LED showing con-
stantly red.
If a connected product can still be
used, the remaining battery capac-
ity is below 50 %.
If a connected product can no
longer be used, the battery has
reached the end of its useful life
and has to be replaced. Consult
Hilti Service.
4 Technical data
SC 30WR-22
Weight without battery
8.2 lb
(3.7 kg)
Rated voltage 21.6 V
Saw blade diameter 7.2 in
(184 mm)
Saw blade disc thickness 0.7 mm …
1.5 mm
Rated speed under no load 4,700 /min
Bevel cutting angle 0° … 50°
Maximum cutting depth 0° 2.6 in
(67 mm)
45° 1.9 in
(48 mm)
50°
1.7 in
(42 mm)
Ambient temperature for operation 1 ℉ … 140 ℉
(−17 ℃ …
60 ℃)
Storage temperature −4 ℉ … 158 ℉
(−20 ℃ …
70 ℃)