Hilti Nuron SC 30WR-22, Original Operating Instructions, Page: 18 / 112

12 English 2264108
*2264108*
▶
If the battery is too hot to touch, it may be defective. Put the battery
in a place where it is clearly visible and where there is no risk of fire,
at an adequate distance from flammable materials. Allow the battery
to cool down. If it is still too hot to touch after an hour, the battery is
faulty. Consult Hilti Service or read the document entitled "Instructions
on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage
and use of lithium-ion batteries. → page 21
Read the instructions on safety and use of Hilti Li-ion batteries
that you can access by scanning the QR code at the end of these
operating instructions.
3 Description
3.1 Product overview 1
@
Spindle lock button
;
Auxiliary grip
=
Scaffold hook (optional)
%
Switch-on interlock
&
Main grip
(
On/off switch
)
Battery release button
+
Battery
§
Clamping lever for cutting
depth adjustment
/
LED line-of-cut light
:
Clamping lever for the fence
∙
Knob, preset for cutting angle
(22.5°, 45°, 50°)
$
Scale for cutting depth adjust-
ment
£
Guard
|
Direction-of-rotation arrow
¡
Arbor
Q
Mounting flange
W
Clamping flange
E
Clamping screw
R
Base plate
T
Operating lever for lower
guard
Z
Hose connector for sawdust
extraction
U
Battery release button
I
Battery status indicator
3.2 Overview: Cutting angle adjustment
@
Scale for cutting angle adjust-
ment
;
Clamping lever for the fence
=
Clamping lever for cutting angle
adjustment
%
Knob, preset for cutting angle
(22.5°, 45°, 50°)
&
Cut marks (0°, 45°)