Hilti NURON AG 5D-22 125, Original Operating Instructions, Page: 19 / 48

*2272031*
2272031 English 11
Type Application Designation Material
Abrasive resin-fiber wheel Rough grinding AP-D Metal
Suitability of wheels for the equipment used
Item Equipment AC­D AG­D,
AF­D,
AN­D
DG-CW
(SPX, SP,
P)
DC-TP,
DC-D
(SPX, SP,
P)
AP-D 3CS, 4CS,
3SS, 4SS,
DD-M14
A Guard X X X X X X
B Front cover (in
combination with
A)
X — — X — —
C Dust hood (grinding)
DG­EX 125⁄5"
— — X — — —
D Dust hood (cutting)
DC­EX 125⁄5"C (in
combination with A)
— — — X — —
E Side handle X X X X X X
F Clamping nut X X X X — —
G Clamping flange X X X X — —
H Kwik lock (optional
instead of H)
X X — X — —
I Clamping nut for
abrasive resin-fiber
wheel
— — — — X —
J Support plate — — — — X —
5 Technical data
Rated voltage
21.6 V
Rated speed 9,000 /min
Maximum wheel diameter 125 mm
Weight in accordance with EPTA Procedure 01, without battery 2.1 kg
Thread diameter M14
Spindle length 22 mm
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 70 ℃
5.1 Battery
Battery operating voltage
21.6 V
Weight, battery See the end of these
operating instructions
Ambient temperature for operation −17 ℃ … 60 ℃
Storage temperature −20 ℃ … 40 ℃
Battery charging starting temperature −10 ℃ … 45 ℃
5.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure. The data given represents the main applications of the power tool.
However, if the power tool is used for different applications, with different accessory tools, or is poorly
maintained, the data can vary. This can significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or