![background image](http://html1.mh-extra.com/html/hilti/dx-2/dx-2_operating-instructions-manual_2136075012.webp)
%
$
G
&
%
$
(7 &
ET
ET
7 Guidelines
7.1 Fastening guidelines
These guidelines must be observed at all times.
NOTE
For detailed information, please ask your local Hilti sales and service office for a copy of the applicable technical
guidelines or national technical regulations.
7.1.1 Minimum distances and spacing
Minimum distances and spacing when fastening to steel
A
min. edge distance = 15 mm (⁵⁄₈")
B
min. spacing = 20 mm (³⁄₄")
C
min. base material thickness = 3 mm (¹⁄₈")
Minimum distances and spacing when fastening to concrete
A
min. edge distance = 70 mm (2³⁄₄")
B
min. spacing = 80 mm (3¹⁄₈")
C
min. base material thickness = 100 mm (4")
7.1.2 Depth of penetration
NOTE
Examples and specific information can be found in the Hilti Fastening Technology Manual.
Nail lengths for steel
ET Depth of penetration: 12 ± 2 mm (½" ± ¹⁄₁₆")
Nail lengths for concrete
ET Depth of penetration: 22 mm (max. 27 mm) (⁷⁄₈"
(max. 1"))
en
6
Printed: 14.08.2014 | Doc-Nr: PUB / 5193679 / 000 / 00
Summary of Contents for dx 2
