Hilti DST 20-CA, Original Operating Instructions

Page: 19 / 52

*2328430*
2328430 English 15
Qty. Designation Qty. Designation
3× eccentric pin 1× flush-cutting flange
1× Standard flange
3.5 Accessories
Accessories for the rail system
Item number Designation Description
284808 DS-R100-L guide rail Saw head guide, long
100 cm
284809 DS-R200-L guide rail Saw head guide, long
200 cm
284810 DS-R230-L guide rail Saw head guide, long
230 cm
371703 DS-ES-L end stop Safety stop for saw head
207137 DS-CP-ML Rail clamp Fastening rails
284814 DS-RF-L rail support Fastening rails
284816 DS-RFP-L rail support For cutting at an angle or on stairs
Accessories for the blade guard for normal cutting
Item number Designation Description
238000 DS-BG65 saw blade guard Blade guard, saw blades up to Ø
≤ 650 mm
2051935 DST-BG80 saw blade
guard, small
Blade guard, saw blades up to Ø
600 mm … 800 mm
238002 DS-BG80 middle section Blade guard, saw blades up to Ø
600 mm … 900 mm
238003 DS-BG80 side section, set Blade guard, saw blades up to Ø
600 mm … 900 mm
Accessories for the flush-cutting blade guard
Item number Designation Description
2135201 DS-BGFT80 middle section Saw blade guard for flush cutting,
Ø
600 mm … 900 mm
2135202 DS-BGFT80 side section,
set
Saw blade guard for flush cutting,
Ø
600 mm … 900 mm
2135203 DS-BGFT120 middle sec-
tion
Saw blade guard for flush cutting
1,000 mm … 1,200 mm
2135204 DS-BGFT120 side section,
set
Saw blade guard for flush cutting
1,000 mm … 1,200 mm
Accessories for flanges
Item number Designation Description
2328063 DST-FCF 60-110 flush-cutting flange
2330150 DST-FCF 1 3/8''/4 Flush-cutting flange (USA version)