4
English
2153083
*2153083*
▶
Wear protective gloves also when changing the tool. Touching the accessory tool can
result in cuts and burns.
▶
Ensure that adequately-sized supports are correctly installed so that the remaining
structure retains its stability even after completion of the cutting work and removal of
the part cut away.
▶
Also secure the area below where cutting is to take place.
▶
Clear the floor saw's work zone of everything that could obstruct work.
▶
Operate the floor saw only when all 4 weights are fitted.
▶
Always position supply cords and hoses so that they do not come into contact with
rotating parts of the equipment. Always run cables and hoses flat on the floor or
ground away from the machine to prevent trip hazards. Use the cable/hose holders
on the floor saw trolley.
▶
Before switching on, make sure that the saw blade is clear and free to rotate.
▶
Adjust the bow grip to suit your stature. Avoid unusual postures. Maintain a firm
footing and balance at all times. This will give you better control of the product in
unexpected situations. Always be prepared for sudden stalling of the tool.
▶
While the saw is running, always stay behind the bow grip and guide the floor saw
trolley by holding it firmly by both grips.
▶
Keep everyone clear of your work zone. Make sure that there is no-one in the zone in
front of the floor saw trolley.
▶
Do not work where there is a risk of falling. Secure the machine and operator to
prevent falls.
▶
To prevent it rolling away, always stand the floor saw trolley on a horizontal surface for
installation or removal of the saw. The wheels of the floor saw trolley can be locked
only when the saw head is installed.
▶
Do not leave the floor saw unattended without the saw head installed and the clutch
locked. Make sure the clutch is securely locked by checking that the floor saw trolley
does not move when pushed.
Printed: 07.05.2019 | Doc-Nr: PUB / 5492449 / 000 / 00
Summary of Contents for DSF 1030-TS
