![background image](http://html1.mh-extra.com/html/hilti/dsf-1030-ts/dsf-1030-ts_original-operating-instructions_2136343014.webp)
10
English
2153083
*2153083*
5.2 Bringing the pointer of the cutting line indicator into the working position.
1. Pull the securing pin out of the hollow bolt.
2. Pull the pointer out until the hole in the hollow bolt (at the pointer side) is aligned with
the hole in the pointer.
3. Insert the securing pin.
➥ The pointer is now in the working position.
Bring the pointer back into its original position (transport position) before folding
the cutting line indicator in towards the trolley.
5.3 Mounting the saw head on the floor saw trolley
WARNING
Risk of injury!
Inadvertent starting of the saw is hazardous.
▶
Always press the EMERGENCY OFF button on the remote control unit before carrying
out any work on the saw.
As a rule, the saw head should be mounted so that the saw blade is on the left-hand
side of the floor saw trolley, as seen from the position of the operator looking in the
direction of travel.
In situations where space is limited (e.g. when making cuts in corners), the saw
head can be turned through 180° and mounted so that the saw blade is on the
right-hand side of the floor saw trolley.
Printed: 07.05.2019 | Doc-Nr: PUB / 5492449 / 000 / 00
Summary of Contents for DSF 1030-TS
