![background image](http://html1.mh-extra.com/html/hilti/dc-d/dc-d_manual_2136444003.webp)
3
Diamond Blades/Wheels
en
This cutting disc/grinding wheel (referred to as the “accessory”) is intended for use
with a hand-held grinder (referred to as the “tool”).
The speed (RPM) listed on the accessory must be
higher than the speed of the tool. If in doubt, the ma-
ximum peripheral speed of an accessory is 80 m/s.
Clean the spindle, flange and clamping nut before
mounting the accessory. Use the correct mounting
flanges, nut, and guard recommended in the tool
operator’s manual. Position the guard so the ma-
ximum area of protection is between you and the
accessory.
The operator and bystanders must always wear
approved safety goggles/glasses, protective gloves,
ear protectors and protective clothing.