![background image](http://html.mh-extra.com/html/hilti/dag-700-p/dag-700-p_original-operating-instructions_2135612020.webp)
8. Insert tools, accessories
Discs of max. 7" diameter designed for use at 8500 /min and a peripheral speed of 80 m/sec
Abrasive discs
Type 1, type 41, type 42
Diamond discs
DC-D 7"
Wire brushes
Max. 7"
Abrasive flap discs
Max. 7"
Accessories
Guard with cover plate
Vacuum cleaner from the Hilti range
Inner clamping flange for flat discs
Outer clamping flange for flat discs
9. Troubleshooting
Fault
Possible cause
Remedy
The power tool doesn’t start.
Interruption in the electric supply.
Plug in another electric appliance
and check whether it works.
The supply cord or plug is defec-
tive.
Have the parts checked by a trained
electrical specialist and replaced if
necessary.
The carbon brushes are worn.
Have it checked by a trained electri-
cal specialist and replaced if neces-
sary.
The power tool doesn’t
achieve full power.
The extension cord’s conductor
cross section is inadequate.
Use an extension cord with an ade-
quate conductor cross section.
10. Disposal
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, Hilti has already made
arrangements for taking back your old power tools or appliances for recycling. Please ask your Hilti customer
service department or Hilti representative for further information.
en
13
Printed: 07.07.2013 | Doc-Nr: PUB / 5069467 / 000 / 00
Summary of Contents for DAG 700-P
