Hilti C 7/24, Operating Instructions Manual, Page: 5 / 29

1
en
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS –
this manual contains important safety and
operating instructions for battery charger
C 7/24 and C 7/36-ACS.
2. Before using battery charger, read all instruc-
tions and cautionary markings on battery
charger, battery and product using battery.
3. CAUTION!
To reduce the risc of injury, charge only
B36/2.4Ah NiCd, BP6-86, B24/2.0,
B24/2.4, SBP10, SBP12, SFB121,
SFB150 and SFB180 (NiCd type), B24/3.0,
SFB105, SFB125, SFB126, SFB155 and
SFB185 (NiMH type) and with adaptor
CA 7/36 the other Hilti batteries RB10,
BP12, BP 40 and BP72 (NiCd type). Other
types of batteries may burst causing per-
sonal injury and damage.
4. Always keep these operating instructions
together with the charger.
5. Ensure that the operating instructions are
with the charger when it is given to other
persons.
ORIGINAL OPERATING INSTRUCTIONS
C 7/24 and C 7/36-ACS chargers
1. General information
1.1 Signal words and their meaning
-WARNING-
The word WARNING is used to draw attention to a poten-
tially dangerous situation which could lead to severe
personal injury or death.
-CAUTION-
Used to draw attention to a potentially dangerous situa-
tion which could lead to minor personal injury or dam-
age to the equipment or other property.
-NOTE-
Used to draw attention to an instruction or other useful
information.
1.2 Pictograms
Contents Page
1. General information 1
2. Description 2
3. Technical data 2
4. Safety precautions 2
5. Before use 3
6. Operation 4
7. Accessories 4
8. Care and maintenance 5
9. Disposal 6
10. Manufacturer's warranty – tools 6
Operating controls and component parts

햲
C 7/24 and C 7/36-ACS chargers
햳
Supply cord
햴
Plug
햵
Battery compartment
햶
Indicator lamps
햷
“Refresh” button (only C 7/24)
햸
CA 7/36 adaptor for BP 12, BP 40, BP 72 and RB 10*
* Only the charger is supplied.
Batteries and adaptors are available as accessories.

These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation “appli-
ance” refers to the C 7/24 and C 7/36-ACS chargers.
Location of identification data on the appliance
The type designation and serial number can be found on
the rating plate on the appliance. Make a note of this data
in your operating instructions and always refer to it when
making an enquiry to your Hilti representative or service
department.
Type:
Serial no.:
Warning signs
General
warning
Warning:
electricity
Warning:
caustic
substances
Read the
operating
instructions
before use
Symbols
Do not dispose of batteries
with general refuse.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069451 / 000 / 00