13
3.5 Items supplied
AI S1/4 scanner, AI E10 grip unit, AI E20 battery for the scanner, AI E21 battery for the grip unit, AI E30
charging adapter, PDA 60 wrist strap, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your
local
Hilti
Center or online at:
www.hilti.com
3.6 Batteries
Note
In order to ensure maximum battery lifespan, charge the batteries at room temperature. Avoid charging
the batteries at temperatures outside the 0 to 45°C range.
The system is powered by a battery in the scanner and a battery in the grip unit. The battery in the grip unit
powers only the RFID reader unit. The battery status indicator in Android and the status LED indicate only
the status of the scanner battery. Both batteries are charged together using the charging adapter supplied.
When the batteries are fully discharged, charging may take up to 10 hours.
3.7 LEDs for scanner battery status, mobile network and Wi-Fi
3.7.1 Scanner battery
Status
Meaning
Lights up red
• Batteries are charging
Flashing red light
• Scanner battery low state of charge
3.7.2 Mobile networks LED
Status
Meaning
Lights blue
• Connected to network/Wi-Fi
LED off
• Not connected
3.7.3 LED for Wi-Fi
Status
Meaning
Lights blue
• Connected to Wi-Fi
LED off
• Not connected
4 Technical data
4.1 Device
Display
4 inch WVGA TFT LCD, 480 x 800 pixels
Operating system
Based on Android
Protection class
IP 54 dust and water spray protection as per
IEC 60529
Camera
CMOS, 5.0 megapixels, autofocus and flash
Weight with batteries
600 g
(21.2 oz)
Weight with batteries
230 g
(8.1 oz)
Bar code scanner
2D imager
4.2 RFID reader unit
Frequency range (UHF ETSI)
865 MHz … 868 MHz
Frequency range (UHF FCC)
902 MHz … 928 MHz
Range
0 m … 6 m
(0 ft … 19 ft - 10 in)
Printed: 07.09.2015 | Doc-Nr: PUB / 5199477 / 000 / 02
Summary of Contents for AI S1/4
Page 2: ...ꙮ ꙭ Ꙭ Ꙧ ꙧ ꙩ Ꙩ ꙫ Ꙫ ꙥ Ꙥ ꙣ Ꙫ 1 Printed 07 09 2015 Doc Nr PUB 5199477 000 02 ...
Page 3: ...2 3 4 ...
Page 4: ...5 6 ...
