![background image](http://html.mh-extra.com/html/hilti/ag-180-20-d/ag-180-20-d_original-operating-instructions_2135580026.webp)
20
English
2075442
*2075442*
3.5
Continuous operation
Option:
AG 180-20 P
Pressing the safety trigger with the on/off switch pressed switches the angle grinder to continuous operation.
• To switch the angle grinder off, press and then release the on/off switch.
3.6
Guard with cover plate
When using abrasive cutting discs to cut or slit metals, the guard with cover plate must be fitted to the
tool. When using diamond cutting discs it is recommended that the guard with cover plate is fitted.
4
Consumables
Use only synthetic-resin-bonded, fiber-reinforced discs with a maximum Ø of 180 mm approved for a
rotational speed of at least 8500 rpm and a peripheral speed of 80 m/s.
The maximum permissible grinding disc thickness is 8 mm and the maximum permissible cutting disc
thickness is 3 mm.
ATTENTION! When cutting or slitting with cutting discs, always use the guard with cover plate.
Discs
Application
Designation
Material
Abrasive cutting disc
Cutting, slitting
ACD
Metal
Diamond cutting disc
Cutting, slitting
DCD
Mineral
Abrasive grinding disc
Rough grinding
AGD, AFD, AND
Metal
Diamond grinding disc
Rough grinding
DGCW
Mineral
Suitability of discs for the equipment used
Equipment
ACD
AG-D
AF-D
AN-D
DGCW
DCD
Guard
—
X
X
X
X
—
Guard with cover plate
X
—
—
—
—
X
Side handle
X
X
X
X
X
X
Clamping nut
X
X
X
X
X
X
Clamping flange
X
X
X
X
X
X
5
Technical data
5.1
Angle grinder
For rated voltage, rated current, frequency and/or input power, refer to the country-specific rating plate.
If the product is powered by a generator or transformer, the generator or transformer’s power output must
be at least twice the rated input power shown on the rating plate of the product. The operating voltage of
the transformer or generator must always be 5 % and -15 % of the rated voltage of the product.
AG 180-20 D/ AG 180-
20 P
Rated power input
2,000 W
Rated speed
8,500 /min
Maximum disc diameter
180 mm
Weight in accordance with EPTA procedure 01
5.2 kg
Drive spindle thread
M14
Thread length
15 mm
Ambient temperature for operation
−17 ℃ … 60 ℃
Storage temperature
−20 ℃ … 70 ℃
Summary of Contents for AG 180-20 D
