![background image](http://html1.mh-extra.com/html/hilti/ag-125-s/ag-125-s_operating-instructions-manual_2135094028.webp)
24
many countries, Hilti has already made arrangements for taking back your old elec-
tric tools for recycling. Please ask your Hilti customer service department or Hilti
representative for further information.
Only for EU countries
Disposal of electric tools together with household waste is not permissible!
In observance of European Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in accordance with nation-
al law, electric tools that have reached the end of their life must be col-
lected separately and returned to an environmentally compatible recycling
facility.
11. Warranty
Hilti warrants that the tool supplied is free of defects in material and workmanship.
This warranty is valid as long as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti operating instructions, all war-
ranty claims are made within 12 months (unless other mandatory national regulations
prescribe a longer minimum period) from the date of the sale (invoice date), and the
technical system is maintained. This means that only original Hilti consumables, com-
ponents and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or replacement of defective parts only.
Parts requiring repair or replacement as a result of normal wear and tear are not cov-
ered by this warranty.
Additional claims are excluded, unless mandatory national rules prohibit such
exclusion. In particular, Hilti is not obligated for direct, indirect, incidental or con-
sequential damages, losses or expenses in connection with, or by reason of, the
use of, or inability to use the tool for any purpose. Implied warranties of mer-
chantability or fitness for a particular purpose are specifically excluded.
Send the tool and/or related parts immediately upon discovery of a defect to the local
Hilti marketing organisation for repair or replacement.
This constitutes Hilti’s entire obligation with regard to warranty and supersedes all pri-
or or contemporaneous comments and oral or written agreements concerning war-
ranties.
12. EC declaration of conformity
Designation:
Diamond cutter
Type:
AG125-S / AG125-SE
Year of design:
2002
We declare, on our sole responsibility, that this product complies with the following
directives and standards: 89/336/EEC, 98/37/EC, EN 55014-1, EN 55014-2, EN 50144-1,
EN 50144-2-3, EN 61000-3-2, EN 61000-3-3.
Hilti Corporation
Dr. Ivo Celi
Dr. Heinz-Joachim Schneider
Senior Vice President
Executive Vice President
Business Unit Diamond
Business Area Electric Tools & Accessories
01 / 2005
01 / 2005
Printed: 07.07.2013 | Doc-Nr: PUB / 5069435 / 000 / 00