![background image](http://html.mh-extra.com/html/hilti/ag-125-19se/ag-125-19se_original-operating-instructions_2135558033.webp)
English
27
2. Fit the side handle. → page 24
3. Fit the guard. → page 24
4. Fit the support plate and the abrasive resin-fiber disc, screw on the clamping nut and tighten it securely.
5. Press the spindle lockbutton and hold it in this position.
6. Use the pin wrench to tighten the clamping nut securely, then release the spindle lockbutton and remove
the wrench.
7 Operation
7.1 Grinding
CAUTION
Risk of injury.
The accessory tool may suddenly stick or stall.
▶
Use the power tool with the side handle (or optional hoop grip) fitted and always hold the power
tool securely with both hands.
7.1.1 Cutting
▶
When cutting, apply moderate feed pressure and do not tilt the power tool or the cutting disc (when
working, hold at approx. 90° to the surface being cut).
Note
For best results when cutting profiles and square tube, start cutting at the smallest cross section.
7.1.2 Rough grinding
▶
Move the power tool to and fro while maintaining a 5° to 30° angle of attack and applying moderate
pressure.
◁
This will avoid overheating and discoloration of the workpiece and help ensure an even surface finish.
7.2 Switching on and off
7.2.1 Switching on
1. Plug the supply cord into the power outlet.
2. Press the rear section of the on/off switch.
3. Slide the on/off switch forward.
4. Lock the on/off switch.
◁
The motor runs.
7.2.2 Switching off
▶
Press the rear section of the on/off switch.
◁
The on/off switch jumps into the off position and the motor stops.
8 Care and maintenance
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local
Hilti
Center or online at:
www.hilti.com
Printed: 05.09.2016 | Doc-Nr: PUB / 5300508 / 000 / 00
Summary of Contents for AG 125-19SE
