![background image](http://html.mh-extra.com/html/hilti/ag-125-15db/ag-125-15db_original-operating-instructions_2135555028.webp)
22
English
Item Equipment
ACD
AGD,
AFD, AND
DG-CW
(SPX, SP,
P)
DC-TP,
DC-D (SPX,
SP, P)
AP-D
F
DCBG 125 hoop handle
(optional for E)
X
X
X
X
X
G
Clamping nut
X
X
X
X
—
H
Clamping flange
X
X
X
X
—
I
Clamping nut for abra-
sive resin-fiber disc
(M14x1.5)
—
—
—
—
X
J
Support plate
—
—
—
—
X
5 Technical data
5.1 Angle grinder
Note
When powered by a generator or transformer, the generator or transformer’s power output must be at
least twice the rated input power shown on the rating plate of the power tool. The operating voltage of
the transformer or generator must always be 5% and -15% of the rated voltage of the power
tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations
from the rated voltage and for country-specific versions. Please refer to the power tool’s type
identification plate for details of its voltage, frequency, current and input power ratings.
AG 125-15DB
Rated power input
1,500 W
Rated speed
11,500 /min
Maximum disc diameter
125 mm
Thread diameter
M14x1.5
Thread length
22 mm
Weight in accordance with EPTA proce-
dure 01/2003
2.7 kg
5.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745-2-3
AG 125-15DB
Sound (power) level (L
WA
)
102 dB(A)
Emission sound pressure level (L
pA
)
91 dB(A)
Uncertainty for the sound pressure level
(K
pA
)
3 dB(A)
Printed: 05.09.2016 | Doc-Nr: PUB / 5300419 / 000 / 00
Summary of Contents for AG 125-15DB
