Descriptions and Requirements
23/71
netSCOPE Data Acquisition Cards for Real-Time Ethernet | Installation, Operation and Hardware Description
DOC131006UM01EN | Revision 1 | English | 2013-11 | Released | Public
© Hilscher, 2013
3.4.4
Power Supply and Host Interface
For the power supply and the host interface
used for the netSCOPE data
aquistion cards
PCI, PCI Express
,
Low Profile PCI Express
,
Compact PCI
and
Mini PCI Express
you must observe the following requirements:
netSCOPE Data
Acquisition Cards
Supply Voltage
Signaling Voltage
Host Interface
Host Interface
(PCI slot)
NSCP-C100-RE\50
+3,3 V dc ±5 %/ Max. 1 A
5 V or 3.3 V
PCI
NSCP-C100-RE\50E,
NSCP-C100-RE\70E
+3,3 V dc ±5 %/ Max. 1 A
PCIe-compatible
PCI Express
NSCP-C100-RE\80
+3.3 V dc ±5 %/ Max. 1 A
5 V or 3.3 V
Compact PCI
NSCP-C100-RE\90E
+3.3 V dc ±5 %/ Max. 1 A
Note:
The power input of the NSCP-C100-RE\90E
does not comply with the standard specifications.
PCIe-compatible
Mini PCI Express
Table 15: Requirements Power Supply and Host Interface for netSCOPE Data Acquisition
Cards
The data in the
above have the following meaning:
Supply Voltage
The required and permissible supply voltage at the netSCOPE data
aquistion card
PCI, PCI Express
,
Low Profile PCI Express
,
Compact PCI
and
Mini PCI Express
.
Note:
To ensure that the compatibility between different systems is guaran-
teed, providing a maximum of 1 A (for +3,3 VDC ±5 %) is recommended.
The typical
current
depends on the type of the netSCOPE data aquistion
card. For detailed values on the typical current see section
netSCOPE Data Acquisition Cards
on page 54.
Signaling Voltage Host Interface
The required or tolerated signaling voltage at the I/O signal pins at the
- PCI bus of the netSCOPE PCI card,
- PCI express bus of the netSCOPE PCIe and Low Profile PCIe cards.
- Compact PCI bus of the netSCOPE Compact PCI card,
- Mini PCI Express bus of the netSCOPE
Mini PCI Express card
Host Interface (PCI slot)
Type of the host interface