6
CD-Inhalt
• ladbare Firmware*
• Hilscher TCP/UDP IP Treiber
• Systemkonfigurator SyCon
• iCon-L**
• die Dokumentation
für unsere netNODE Gateways.
Die Erstinbetriebnahme erfolgt durch den Systemkonfi-
gurator SyCon. Dazu ist eine serielle Verbindung zwi-
schen der Diagnoseschnittstelle des netNODEs und
dem COM-Port des PCs herzustellen. Das hierfür ver-
wendetet Kabel trägt die Bezeichnung CAB-NN.
Mit dem Systemkonfigurator SyCon ist dann
• die Firmware
• die Konfiguration (incl. IP-Adresse) sowie
• die Grundgatewayfunktion (Image Datei)
in den netNODE zu laden.
Eine Konfiguration und Diagnose ist nun auch über das
netNODE Display mittels der Cursortasten möglich. Die
Konfiguration wird auf dem Gateway gespeichert, so
dass dieses beim Starten sofort betriebsbereit ist.
Alternativ kann vom SyCon die Konfiguration bzw. Dia-
gnose über eine TCP/IP Verbindung zum net durchge-
führt werden.
* Falls es eine neue Firmwareversion gibt, können Sie
diese von unserer Homepage herunterladen.
** Zum Betrieb der lizensierten Version der Bausteinbi-
bliothek iCon-L benötigen Sie einen Lizenzcode.
Wenn dieser im Lieferumfang mit enthalten ist, finden
Sie ihn als Label auf dieser CD. Andernfalls wenden
Sie sich bitte an Ihren Distributor oder direkt an uns.
CD Content
• loadable Firmware*
• Hilscher TCP/UDP IP Driver
• System Configurator SyCon
• iCon-L**
• Documentation
for our netNODE Gateways.
The initial start-up takes place via the System Configu-
rator SyCon. For this it is necessary to built up a serial
connection between the diagnostic interface of the net-
NODE and the COM-Port of the PC. The cable which is
used for this has the designation CAB-NN.
With the System Configurator SyCon
• the firmware
• the configuration (incl. IP Address) as well as
• the basic gateway function (Image file)
has to be loaded in the netNODE.
A configuration and diagnostic is now also possible via
the netNODE display by means of the cursor keys. The
configuration is stored on the Gateway, therefore it is
immediately ready for operation after the start.
Alternatively the configuration and diagnostic can be
done via a TCP/IP connection to the netNODE.
* If there are new firmware versions available you can
download it from our homepage.
** A license code is required to use the licensed version
of the module library iCon-L. If this is included in the
scope of delivery you will find it on a label on this CD.
Otherwise please call your distributor or us directly.
Summary of Contents for netNode
Page 26: ...26 Reserved Reserviert...