22
Konfiguration des netNODE
Die Konfiguration des netNODE erfolgt über eine seriel-
le oder eine TCP/IP Verbindung.
Starten Sie den Systemkonfigurator SyCon und wählen
Sie das Menü
Datei > Neu > netDEVICEs
.
Rufen Sie nun das Menü
Einfügen > Gerät
auf und
wählen Sie das gewünschte Gerät aus, und bestätigen
Sie diese Auswahl mit
OK
.
Es erscheint nun ein weiteres Fenster, in dem Sie die
Protokolle für die Umsetzung bestehend aus
• Ethernet Protokoll und
• seriellem Protokoll
auswählen müssen.
Mit dem Menü
Einstellungen > netNODE Parameter
oder einem Doppelklick auf das Gerät öffnet sich das
Parameter Fenster. Stellen Sie die IP-Adresse (ggf.
auch die Netzmaske und die Gatewayadresse) sowie
die Parameter (insbesondere die Stationsadresse und
die Busparameter) ein.
Stellen Sie mit
Einstellungen > Gerätezuordnung >
CIF TCP/IP Driver
und Angabe der IP-Adresse eine
Verbindung mit
Connect to Server
oder mit
Einstel-
lungen > Gerätezuordnung > CIF Serial Driver
und
Verbinde COMx
eine Verbindung zum netNODE her.
In der Geräteauswahl ist dann das Gerät anzuhaken.
Mit dem Menü
Online > Download
führen Sie einen
Download auf das Gerät durch.
Nach dem Download führt das netNODE selbständig
einen Reset durch. Danach ist die neu eingestellte IP-
Adresse gültig.
Configuration of netNODE
The configuration of the netNODE is made via a serial
or a TCP/IP connection.
Start the System Configurator SyCon and select the
menu
File > New > netDEVICEs
.
Now call up the menu
Insert > Device
and select the
desired device. Confirm this selection by clicking the
OK
button.
Now a further window appears where you have to sel-
ect the protocol conversion which exists of
• Ethernet Protocol and
• serial Protocol.
With the menu
Settings > netNODE Parameter
or a
double click on the device the Parameter window
opens. Set the IP Address (if necessary also the Net
Mask and the Gateway Address) as well as the parame-
ter (especially the Station Address and the Busparame-
ter).
Built up a connetion to the netNODE with
Settings >
Device Assignment > CIF TPC/IP Driver
, type in the
IP Address and press the
Connect to Server
button or
built up the connection by selecting the menu
Settings
> Device Assignment > CIF Serial Driver
and press
the
Connect COMx
button. You have to enable the
device in the device assignment by selecting it in the
check box.
With the menu
Online > Download
you make a down-
load to the device.
After the download the netNODE executes indepen-
dently a reset. Afterwards the new set IP Address is
valid.
Summary of Contents for netNode
Page 26: ...26 Reserved Reserviert...