Hillyard TRIDENT T20SC PRO, Service Manual

Page: 24 / 65

4.3.2 Squeegee adjustment
wheels
• Put the machine in safe conditions.
• Remove the squeegee support
(see sec-
tion 4.3.1 at page 22 )
.
• Remove the squeegee adjustment
knob and the spring.
• Remove the Adjustment Wheel As-
sembly.
• Unscrew the fixing screw of the
wheel to the support.
• Proceed at reverse to refit the part.
4.3.3 Squeegee Rotation Arm
• Put the machine in safe conditions.
• Disassemble the Squeegee Support
(see section 4.3.1 at page 22 ) (see fig. 4.3.3-25 )
.
• Loose the screws that block the
Squeegee Rotation Arm to the Ma-
chine Chassis.
• Remove the Squeegee Rotation Arm.
• Proceed at reverse to refit the part
taking care about the bushing posi-
tioning.
4.3.3-25 4.3.3-26
4.3.4 Recovery Tank
• Put the machine in safe conditions.
• Uncouple the Vacuum Hose and the
Drain Hose from the Recovery tank
Inlet.
• Remove the Vacuum Motor
(see section
4.3.6 at page 24 )
.
• After having provided a support, un-
screw the screws of the retaining
rope and of the tank rotation hinges
and remove it.
• Remove the internal components of
the tank.
24