Hillyard TRIDENT T20SC PRO, Service Manual

Page: 27 / 65

• Remove the lower carters and the
water assembly
(see fig. 4.5.1-45 )
.
• Remove the remaining parts
(see fig.
4.5.1-46 )
.
• Proceed at reverse to refit the part.
4.5.1-45 4.5.1-46
4.5.2 Solution Filter
• Put the machine in safe conditions.
• Loose the filter and remove it from
its housing
(see fig. 4.5.2-47 )
.
• Slip off the OR gasket from the filter
paying attention to not damage it.
• Proceed at reverse to refit the part.
4.5.2-47
4.5.3 Solenoid Valve
• Put the machine in safe conditions.
• Disconnect the rubber hoses and the
electrical connector connected to the
solenoid valve and unscrew the ring
nut to remove the solenoid valve
(see
fig. 4.5.3-48 )
.
• If necessary, remove the coil screw
and remove it
(see fig. 4.5.3-49 )
.
• Proceed at reverse to refit the part
(Position the spacer washer properly
to refit the valve to the brush deck
body).
4.5.3-48 4.5.3-49
27