Hillyard TRIDENT R26SC PRO, Use And Maintenance Manual

Page: 21 / 84

ENGLISH
CLEANING THE SQUEEGEE BODY
The careful cleaning of the whole vacuum unit ensures better drying and cleaning of the floor as well as a longer suction motor life. To carry out the cleaning of the squeegee body, proceed as follows:
1. Take the machine to the maintenance area.
2. Make sure the machine has been secured (see the section titled “ SECURING THE MACHINE ”).
CAUTION : these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal objects.
3. Extract the vacuum hose (1) from the vacuum nozzle on the squeegee body ( Fig.1 ).
4. Completely unscrew the knobs (2) in the squeegee body's pre-assembly ( Fig.2 ).
5. Remove the squeegee body from the slits in the squeegee connector ( Fig.3 ).
6. Thoroughly clean the squeegee body vacuum chamber (4) with a jet of water, and then with a damp cloth ( Fig.4 ).
NB : the place designated for this operation must comply with current environmental protection regulations.
7. Thoroughly clean the squeegee body's rear rubber blade (5) with a jet of water, and then with a damp cloth ( Fig.5 ).
8. Thoroughly clean the squeegee body front rubber blade (6) with a jet of water, and then with a damp cloth ( Fig.6 ).
9. Thoroughly clean the vacuum nozzle with a jet of water, and then with a damp cloth.
10. Proceed in the opposite order to reassemble all the parts.
To clean the squeegee body with the optional spray gun kit, proceed as follows:
1. Take the machine to the maintenance area.
2. Lift the brush head body and press the “BRUSH HEAD CONTROL” button (1) on the control panel ( Fig.1 ).
NB : as soon as the button (1) on the control panel is pressed, the green LED (2) (“BRUSH HEAD BODY WORK POSITION”) will switch off ( Fig.1 ).
3. Lift the squeegee body and press the “SQUEEGEE CONTROL” button (3) on the control panel ( Fig.1 ).
N.B. : as soon as the button (3) on the control panel is pressed, the green LED (4) (“SQUEEGEE BODY WORK POSITION”) will switch off ( Fig.1 ).
CAUTION : these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal objects.
4. Extract the vacuum hose (5) from the vacuum nozzle on the squeegee body ( Fig.2 ).
5. Completely unscrew the knobs (6) on the squeegee body pre-assembly ( Fig.3 ).
6. Remove the squeegee unit from the slits in the squeegee connector ( Fig.4 ).
7. Release the tank cleaning accessory (7) (at the back of the machine) from the retainers ( Fig.5 ).
8. Activate the optional tank cleaning kit on/off pump by pressing the button (8) on the steering column of the machine ( Fig.6 ).
CAUTION : when using the optional tank cleaning kit, you are advised to always wear goggles to avoid any risk of serious injury to your eyes.
N.B. : Before activating the optional tank cleaning kit, check the level indicator (9) to see how much solution there is in the solution tank ( Fig.7 ).
9. Activate the solution jet by pressing the lever in the tank cleaning accessory. Make sure the jet is pointing into the tank before pressing the lever.
N.B. : To adjust the solution jet from the tank cleaning accessory, turn the knob (10) on the accessory itself ( Fig.8 ).
N.B. : To adjust the intensity of the solution jet from the tank cleaning accessory, turn the knob (11) on the accessory itself ( Fig.9 ).
N.B. : To stop the solution jet, use the lever (12) on the tank cleaning accessory ( Fig.10 ).
10. Thoroughly clean the vacuum chamber of the squeegee body, first with a jet of water and then with a damp cloth.
N.B.
: the place designated for this operation must comply with current environmental protection regulations.
11. Thoroughly clean the rear rubber blade of the squeegee body, first with a jet of water and then with a damp cloth.
12. Thoroughly clean the front rubber blade of the squeegee body, first with a jet of water and then with a damp cloth.
13. Thoroughly clean the vacuum nozzle with a jet of water, and then with a damp cloth.
14. Proceed in the opposite order to reassemble all the parts.
6 4 5
3
4
2 3 1
1 2
1
4
2
3
1
5
7
6
8
4 3 2
5 6
7 8
9
10
9
11
10
12
21