Hillstone SG-6000 Series Firewall Appliance Installation Manual
Check the following specifications when installing the appliance on a workbench:
•
Make sure the workbench is stable and well grounded.
•
Make sure the intake and the exhaust vents are unblocked, and keep the appliance
well ventilated.
•
Do not place any heavy object on the top of the chassis.
Installing the Appliance on a Rack
Before mounting the appliance on a rack, ensure that the power is off, and the rack is stable
enough and well grounded. Hillstone firewall appliances are designed for a 19-inch standard
rack.
To rack-mount the chassis:
Note
: SG-6000-M2100 requires a plate under it to fit in a rack.
Step 1
: Attach rack-mounting ears to the left and right side panels of the chassis respectively,
and then fasten the rack-mounting ears with suitable screws, as shown in Figure 3-2.
Figure 3-2: Installing the Rack-mounting Ears (1U Chassis as example)
Step 2
: Take out screws from the accessory box and fasten the rack-mounting ears of the
chassis in the rack with the screws. Keep the center of rack-mounting ear and the center of
the rack hole horizontally even, as shown in Figure 3-3.
- 30 -
