manualshive.com logo in svg

Hills SmartIP-4EDX, User Manual

Share
Download
Hills SmartIP-4EDX User Manual Download Page 63

Part 3 - Configuration

63

Storage

Indicates each disk's status.

Configure Disk Bad and Disk Temperature settings under Setup > System > Monitoring. 

Disk Bad

Not Formatted

A disk that has never been used before.

Good

 

•

Disk performing normally.

 

•

If the HDD is partially damaged, indicates the bad sector 
percentage.

Error

 

•

If the HDD's bad sector ratio is higher than as designated by the 
user.

 

•

Generates a system event.

Temperature

N/A

Unable to detect the disk's temperature.

Good

Operating within normal temperature range.

Bad

 

•

Disk temperature higher than as designated by the user.

 

•

Generates a system event.

S.M.A.R.T.

N/A

A disk that does not support S.M.A.R.T.

Good

A disk with normal S.M.A.R.T. status.

Bad

A disk with abnormal S.M.A.R.T. status. Possibility of damage within 
24 hours.

Check each disk's data storage time information under Recording Data.

Summary of Contents for SmartIP-4EDX

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands