6
Mount bracket
Ensure the head of the bolts
do not protrude more than
8-10mm.
Step 3 – Fixing to a brick or masonry wall
3.1
Double check to ensure you have sufficient clearance and the area is free from
pipes and other obstructions.
3.2
Mark the position of the mount bracket hole centres on the wall.
The mount hole centres vary for each product (refer to table on page 5).
If you are replacing an existing Hills Folding Clothesline product using the original
fasteners, ensure they are suitable and still in good condition.
For sound brick/masonry walls, we recommend using appropriate flush head 10mm
diameter fasteners.
Fig. 3
Fig. 4
3.3
Drill appropriately sized holes in your wall to suit the fasteners being used (
Fig. 3
).
3.4
Clear holes of dust and debris before inserting fastener (
Fig. 4
).
8-10mm
Installation
