- 2 -
Safety Instruction
Please review the following safety precautions. If this is your first time to use a satellite receiver,
then read this manual before installing or using this receiver. If the receiver is not functioning
properly, please contact your local distributor or system installer.
Please read the safety instructions carefully.
Please keep this instruction manual for future reference.
Please keep this Set-top Box away from humid conditions.
Place this Set-top Box on a reliable flat surface before setting it up.
Do not place it on soft furnishings.
If any of the following situations arises, contact your local distributor or system installer.
-
If the Set-top Box has been exposed to any liquid or moisture.
-
If the Set-top Box has been damaged in anyway.
-
If the Set-top Box is not working as per the instructions in this instruction manual.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning symbol in a triangle is used to alert you to the presence of dangerous
voltages inside the receiver that may be sufficient to constitute a risk of electric shock
to anyone opening the case. It is also used to indicate improper installation or handling
of the receiver that could damage the electrical system in the receiver or in other
equipment attached to the receiver.
The exclamation point in a triangle is used to alert you to important operating and
maintenance instructions. Failure to follow these instructions could result in injury to
you or damage to the receiver.
Be careful with electricity:
Power outlet:
To prevent electric shock, make sure the electrical plug used on the receiver’s
power cord matches the electrical outlet used to supply power to the receiver. Connect the
power cord only to a power source that operates at 100~240 Volts AC, 50/60 Hz.
Power plug:
If a three-prong power plug is provided with the receiver, make sure it is used
with a properly grounded three-wire power socket.
Power cord:
Make sure the power cord is routed so that it will not be stepped on or pinched
by heavy items.
Power overloading:
Avoid overloading electrical outlets or extension cords, which otherwise
could result in electric shock or fire.
Lightning:
For protection from lightning, or when the receiver is left unattended for a long
period, disconnect it from the power source.
Protect other equipment:
Unplug the receiver before connecting any other equipment,
especially the antenna. Connect all equipment to the receiver before plugging any power
cords to the power source.
