9
8
Installation
Installation
Step 4 – Mounting your cabinet to a post
4.1 Prepare your cabinet location
Determine the best location for the installation of your product (refer to page 4).
Mark out a centre line for your product within your allocated site.
4.2
Determine your post locations.
Install as per the instructions supplied with your post kit.
Refer to diagram on page 5 to determine the installation height.
Refer to page 2 for the post kit available.
4.3
To post mount your cabinet you will need to purchase a matching
mount bar kit (refer to page 2).
4.4
Attach the mount bar to the post as per instructions supplied with your
mount bar kit.
Fig. 4
Ensure surrounding area
is free from obstruction
Product centr
e line
2.0m (6'6") to
6.5m (21’4")
Step 4 (continued) – Mounting your cabinet to a post
4.5
Remove the arm from the cabinet by pulling on the two blue end caps. Remove the
end covers only from the cabinet by unscrewing the two screws (
Fig 5
).
4.6
Locate the cabinet with the pre drilled holes in the mount bar (sold separately). Using
the fasteners and instructions provided with the mount bar kit secure the cabinet to
the post assembly (
Fig 5
).
4.7
Reattach the cabinet end covers and secure with the screws. Refit arm into cabinet.
Fig. 5
Post kit
(sold separately)
End cover
End cover
Washer
Washer
M8 nyloc nut
M8 x 45
socket head
bolt
Mount bar
(sold separately)
End cover
End cover screw
End cover screw
Arm
End cover screw
End cover screw
Blue end cap
