Hillphoenix JNRBHSA, Owner'S Installation & Operations Manual

Page: 3 / 59

iii
LIABILITY NOTICE
For Cases with Shelf Lighting Systems
Hillphoenix does NOT design any of its shelf lighting systems or any of its display cases with shelf lighting systems for direct or
indirect exposure to water or other liquids. The use of a misting system or water hose on a display case with a shelf lighting sys-
tem, resulting in the direct or indirect exposure of the lighting system to water, can lead to a number of serious issues (including,
without limitation, electrical failures,
fi re, electric shock, and mold) in turn resulting in personal injury, death, sickness, and/
or serious property damage (including, without limitation, to the display itself, to the location where the display is situated [e.g.,
store] and to any surrounding property). DO NOT use misting systems, water hoses or other devices that spray liquids in Hillphoe-
nix display cases with lighted shelves.
If a misting system or water hose is installed or used on a display case with a shelf lighting system, then Hillphoenix shall not
be subject to any obligations or liabilities (whether arising out of breach of contract, warranty, tort [including negligence], strict
liability or other theories of law) directly or indirectly resulting from, arising out of or related to such installation or use, including,
without limitation, any personal injury, death or property damage resulting from an electrical failure,
fi re, electric shock, or mold.
P079211M, REVO
R-744 (CO
2
NOTICE)
For Systems Utilizing R-744 (CO2) Refrigerant
For refrigeration units that utilize R-744(CO2), pressure relief and pressure-regulating relief valves may need to be installed
based on the system capacity. The valves need to be located such that no stop valve is positioned between the relief valves and
the parts or section of the system being protected.
When de-energizing refrigeration units containing R-744 (CO2), venting of the R-744 (CO2) refrigerant may occur through the
pressure regulating relief valves. These valves are located on the refrigeration system and not on the case model. If venting
does occur, the valve must not be defeated, capped, or altered by any means.
WARNING: Under no circumstances should any component be replaced or added without consulting HILL PHOENIX Field
Service Engineering. Utilizing improper components may result in serious injury to persons or damage to the system.