manualshive.com logo in svg

HILLENBRAND INDUSTRY Hill-Rom TotalCare P1830A, User Manual, Page: 40 / 50

Share
Download
HILLENBRAND INDUSTRY Hill-Rom TotalCare P1830A User Manual Download Page 40

General Cleaning/Disinfecting

34

General Cleaning/Disinfecting

WARNING:

Follow the cleaning product manufacturer’s instructions. Failure to do so could result in personal injury or 
equipment damage.

WARNING:

Unplug the unit from its power source. Failure to do so could result in personal injury or equipment damage.

WARNING:

Do not expose the unit to excessive moisture that would allow for liquid pooling. Personal injury or equipment 
damage could occur.

CAUTION:
Do not use harsh cleansers/detergents, such as scouring pads and heavy duty grease removers, or solvents, 
such as toluene, xylene, and acetone. Equipment damage could occur.

CAUTION:
Ensure that the metal platform is dry before placing the mattress back onto the bed. Failure to do so could 
result in equipment damage.

If there is no visible soilage with possible body fluids, we recommend that you clean the unit with a mild 
detergent and warm water. If disinfection is desired, you may use a combination cleanser/disinfectant as 
explained in “Disinfecting” on page 35. 

In either case, ensure that the metal platform is dry before placing the mattress back onto the bed.

General Cleaning

CAUTION:
Ensure that the metal platform is dry before placing the mattress back onto the bed. Failure to so could result in 
equipment damage.

Clean the unit with a lightly dampened cloth and ordinary disinfectants. Do not use excessive liquid. Allow the 
metal platform to dry before placing the mattress back onto the bed.

Steam Cleaning

Do not use any steam cleaning device on the TotalCare® Bariatric Bed. Excessive moisture can damage 
mechanisms in this unit.

Cleaning Hard to Clean Spots

To remove difficult spots or stains, use standard household cleaners and a soft bristle brush. To loosen heavy, 
dried-on soil or excreta, you may first need to saturate the spot.

Summary of Contents for Hill-Rom TotalCare P1830A



















































Reviews:

No comments