HILLENBRAND INDUSTRY Hill-Rom TotalCare P1830A, User Manual, Page: 19 / 50

Features
13
To Activate:
• If the master lockout is enabled, it must be deactivated to allow other controls to stop the foot section.
• Hold the CPR pedal down with your foot until the head section reaches the flat or desired position and you hear
the audible tone. Release the CPR pedal to stop head section movement. The foot and knee sections will
automatically move to a flat position.
• A cardiac arrest board is required. The head board can be used in place of the cardiac arrest board.
• To stop foot section movement, simply press any other siderail control.
WARNING:
When the AC power is lost, only the head section will lower.
NOTE:
The Bed Up/Down controls can be used when the CPR function is activated.
Head and Intermediate Siderails
TotalCare® Bariatric Bed siderails have been
designed for one-step operation.
Siderails in the raised position are intended to make
the patient aware of the proximity of the edge of the
sleep surface.
Siderails in the down position, below the patient
surface, facilitates a patient’s entry or exit from the
bed. This design feature also facilitates unobstructed
access to the patient.
WARNING:
Applying forces of greater than 100 lb (45.5 kg) into a siderail while the patient is on his or her side may create
an unstable bed situation. Care should be taken when a patient rolls against a siderail. Failure to do so can
result in patient injury.
To Activate:
• Raise a siderail by pulling the siderail up until it
latches into the locked position.
• While raising the siderails, a click will be heard when
it latches into the locked position.
• Lower a siderail by grasping the release handle and
pulling out. The siderail automatically lowers and
tucks under the sleep surface perimeter.
Siderails Raised
Siderails Lowered
OneStep® Siderail Release
Mechanism