Hillco 3700S, Operator'S Manual, Page: 14 / 40

14
Leveling System Controls-Continued
The leveling system is equipped with a maximum level warning indicator on the monitor. On
the Main Control Screen MAXIMUM LEVEL will be displayed and the lower right red LED will
illuminate. This indicates when the machine has reached its maximum leveling capability.
Important tire and tread width restrictions apply to the use of combines equipped with the
Model 3700S Leveling system that are intended for use on slopes exceeding the maximum
leveling capability. See the “Slope Restrictions” section of this manual for important details of
these restrictions.
HEADER TRIM SWITCH
The header trim switch is the four-position header control switch mounted in the combine’s
SR control lever. It is used to raise and lower the header as well as trim the header left and
right.
TILT LEFT: Push the switch to the left to tilt the header counterclockwise.
TILT RIGHT: Push the switch to the right to tilt the header clockwise
Header Trim
Switch
Maximum Level
will be Displayed
Red LED will
Illuminate