...
before requesting confirmation that the lubricant levels have been checked and are
correct
.
Press the rotary control knob
to confirm the lube check
.
The screen will briefly show the Hill logo, the software version and the accumulated running
hours
...
6
Switch compressor on
Rotate the knob again to alternate between BAR
,
PSI
and MPa
. When you have chosen the
unit of measure, press the control knob to confirm. The chosen unit of measure will be retaine
d for future use even when the compressor is switched off. This can be cha
n
ged at any time.
To return to the “set pressure” screen, rotate the knob anticlockwise and press to confirm
.
The display will then change to “set pressure”. A default pressure of 100BAR (1450PSI/10MPa)
is di
s
played
.
If you are using the compressor for the first time, the unit of measure will display in BAR.
To change the unit of measure to PSI or MPa, rotate the control knob clockwise and press
to confirm
