manualshive.com logo in svg

Hill-Rom Synclara PSC1, User Manual

Share
Download
Hill-Rom Synclara PSC1 User Manual Download Page 59

Synclara™ Cough System, Model PSC1 User Manual (196286 REV E) 

 51

Device Settings

3.

Press on each of the empty field and use 
the on-screen keypad to enter the 
settings for:

•

IP Address

•

Gateway

•

Subnet

•

DNS

4.

After all entries are made, press on the 
last entered yellow highlighted field to 
close the keypad.

5.

To test the entries made, press 

Test 

Connections

.

If the test is complete, a confirmation 
screen shows.

•

If the test is unsuccessful, try again 
later.

•

If the test continues to fail, contact 
Hill-Rom.

Press 

Return 

to exit the test connection 

screen.

6.

To connect to the server, slide 

WiFi 

to 

OFF

, then 

ON

 again.

The network settings entered are 
submitted to the server.

7.

When complete, press the 

Home

 menu 

control to exit.

8.

Press the 

Home

 menu control to exit.

Draft_E_2019-Apr-29_Cleaned

Summary of Contents for Synclara PSC1















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands