Accessory Assembly Instructions
Chapter 1: Introduction
Page 1 - 20
Senior Seating
TM
Collection Service Manual
1
2
3
4
5
6
7
Shoulder Bolsters (C) (All Model Chairs)—P467A and P476A
Body Bolsters (B) (All Model Chairs)—P468A and P477A
1. Install the bolster mounting brackets (A) on each side of the chair back
frame (see figure 1-10 on page 1-20).
NOTE:
Mount the brackets with the black T-knob facing downward.
2. Locate the existing holes, and insert the truss head cap screws through the
bracket and frame. Secure with the locknuts.
3. Slide the bolster arm into the mounting bracket.
4. Position the bolsters as desired, and tighten the T-knob.
5. Remove or reposition the bolsters by loosening the T-knob.
NOTE:
You can use only one set of bolsters at a time.
Figure 1-10. Shoulder and Body Bolsters
m124_047
m124_046
m124_052
A
B
C
