manualshive.com logo in svg

Hill-Rom Century+ P1400, Service Manual

Share
Download
Hill-Rom Century+ P1400 Service Manual Download Page 194

Exchange Policy

Chapter 5: Parts List

™ Bed Service Manual (man241)

Page 5 - 7

5

Exchange Policy

The following are policies for in-warranty and out-of-warranty exchanges from 
Hill-Rom.

In-Warranty Exchanges

In some cases, Hill-Rom will request that parts/products be returned for 
inspection. When this occurs, you are expected to return parts/products within 
30 days of receipt of the exchange part. If you fail to return the inoperative 
parts/products within the 30 day period, Hill-Rom will invoice your facility for 
the full selling price of the parts/products.

NOTE:
The preceding billing procedure pertains only to parts/products that Hill-Rom 
requests to be returned.

In some cases, the invoice accompanying the parts will show the full selling 
price (only for internal use at Hill-Rom). Do not confuse this price with your 
price.

Do not return any parts without an RMA number. When parts/products have 
been requested to be returned, Hill-Rom will include an RMA packet with the 
parts/products shipment. If an RMA number is not available, obtain one by 
phoning Hill-Rom Technical Support at (800) 445-3720.

Out-of-Warranty Exchanges

You are expected to return the inoperative parts/products within 30 days of 
receipt of the exchange part. Hill-Rom will include an RMA packet with the 
parts/products shipment. If an RMA number is not available, obtain one by 
phoning Hill-Rom Technical Support at (800) 445-3720. If you fail to return 
the equipment within 30 days, Hill-Rom will invoice your facility for the 
difference between the exchange price and the new price of the part.

Summary of Contents for Century+ P1400






















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands