19
©2017 Hill-Rom Services, Inc. ALL RIGHTS RESERVED.
205278 rev 2 13-SEP-2017 ENG – US
Transport with IntelliDrive® Powered Transport (Optional Feature)
For beds equipped with IntelliDrive® Powered Transport, locate the Transport
Pod on the right push handle at the head of the bed. Swivel it towards you
and follow the steps shown on the Transport Pod.
1. Unplug the power cord and set the brake pedal to steer.
2. As the drive wheel lowers, the indicator on the Transport Pod flashes
green. When the wheel has lowered completely, the indicator turns solid
green and a single beep will sound.
3. Press down on one of the black enable switches on the underside of the
blue push handles. Apply pressure to the handles to move the bed either
forward or backward.
NOTE: The bed will not move until pressure is applied to the handles.
To move the bed, push or pull on the handles while pressing down on the
enable switch. Applying pressure to the handles activates the motor and
moves the bed in the direction of applied pressure.
Decreasing pressure on the handles will slow the bed down to go onto
elevators and through doorways.
To deactivate the IntelliDrive® feature, set to Brake or Neutral, or plug the
bed into power.
NOTE: Remember if plugging into power — it is best to set brake first to
avoid “Brake Not Set” verbal safety prompt.
Ergonomic Push Handles (Optional Feature)
Our ergonomic push handles are designed to provide variable grip points for
people of various heights. When not in transport, the push handles can be
stowed away.
NOTE: For beds without push handles, the headboard has a built-in rail that
can be used to navigate during transport.
Corner Bumper with Equipment Sockets
Located at each corner of the bed, there are four equipment sockets for
attaching accessories such as IV poles and oxygen tank holders.
T R ANSP O R T
