11
©2017 Hill-Rom Services, Inc. ALL RIGHTS RESERVED.
205278 rev 2 13-SEP-2017 ENG – US
G E N E R AL B E D OV E RV I E W
Motion-Activated Nightlight
The nightlight is located at the foot-end of the base frame and stays on when
the bed is plugged into power. When the patient gets out of the bed, the
nightlight brightens to improve visibility around the foot-print of the bed,
making it easy to get back into bed.
NOTE: The Motion-Activated Nightlight stays illuminated for 15-minutes
after the patient is out of bed. When the patient gets back into bed, it will
automatically turn off after 2-minutes.
Patient Helper Device/Trapeze (Optional Feature)
The patient helper can be used by patients to assist with mobility and
repositioning.
To install: remove the pull pin from the patient helper mount at the head of
the bed and insert the arm assembly into the mount. Insert the pin to hold
the arm assembly into place.
Then, install the horizontal arm and insert the pull pin to hold it in position.
Install the trapeze clamp assembly on the horizontal arm and tighten.
NOTES:
• Before adding or removing the patient helper, make sure the brake is set,
the bed is in the lowest position and the patient is not in the bed.
• Use correct lifting techniques and ask for assistance when installing or
removing the Patient Helper.
