Hill-Rom 2000009, Service Manual

Page: 94 / 118

94 www.liko.com
NOTE
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
- Repairs and maintenance may only be performed by personnel authorized by HillRom/Liko and using original Liko spare parts.
5.514
Parking Hook for Golvo
Parkeringskrok för Golvo
Assembly Instruction
Monteringsanvisning
Prod. No. 2006001
3. Replace the Roll Frame Attachment
and mount the screws.
1. Loosen the screws (A) on the lift arm.
Pull out the Roll Frame Attachment (B).
If pre-drilled holes are missing, follow the instructions below:
2. Drill and thread two holes M6 under the lift arm,
according to sketch.
IMPORTANT! Remove chips from the inside of
the pipe.
4. Mount the Parking Hook with the two
screws M6 (included)