Hill Audio LMR-1202FX User Manual Download Page 3

PAGE 2

Health advice

This unit produces and absorbs electromagnetic radiation. The strength of radiation and the sensitiv-
ity for disturbing interference matches the CE and FCC requirements. A corresponding sign is printed 
on the backside of the unit. Any change or modification may affect the behavior of the unit concerning 
electromagnetic radiation, with the CE requirements eventually not to be met any more. The manufac-
turer takes no responsibility in this case.

Functional advice

This unit is immune to the presence of electromagnetic disturbances – both conducted and radiated 
- up to a certain level. Under peak conditions, the unit is classified to show a “class C” performance 
criteria and may encounter temporary degradation or loss of function which may need manual help 
to recover. In such case, disconnect the AC power from the unit and reconnect it again to recover. 

Environmental advice

This unit is built to conform to the ROHS standards and the WEEE directive 2002/96/EC of the 
European Parliament and of the Council of the European Union. Under these regulations, the product 
shall not be discarded into regular garbage at the end of its life, but shall be returned to authorized 
recycling stations.

Unpacking

Please check that the box contains the following items:

Main parts: 

1 pc. LMR1202FX main unit

 

 

1 pc. Mains cable

 

 

1 pc. Operation manual

If any part is missing, please contact your dealer immediately for replacement.

Warning

 

 

After unpacking, and before plugging the AC cord in the wall outlet, check whether the  

 

 

AC mains voltage and frequency is the same as this product is specified for (see rear  

 

 

panel of product). Whenever the specified voltage or your AC plug should not match  

 

 

the local conditions, do NOT plug the AC cord into the wall outlet and contact your 

  dealer 

 

immediately.

Description

The LMR-1202FX is a compact rack-format live sound mixer with 8 Mic/Line mono inputs and 2 
stereo line inputs. It features 2 Aux buses - one pre-fader as a monitor bus, one post-fader as an 
effects bus, connected to the internal 16-programs/16 variations DSP effects processor. A 3.5mm 
TRS jack serves as an input for mobile players, making this mixer a versatile centre piece of any port-
able or installed sound system. 

USER MANUAL - LMR1202FX RACK MIXER

Summary of Contents for LMR-1202FX













Reviews: