Ex
Explosion-proof Dome
·
Quick Start Guide
vi
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions:
Neglecting any of the cautions may cause injury or equipment damage.
Warnings
Grounding: The both internal and external earthing shall be connected reliably.
All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
Make
sure that the power has been disconnected before you wire, install or
disassemble
the speed dome.
Never
wire, install or
disassemble
the speed dome in
explosive environment.
To avoid fire danger caused by electrostatic charge, never touch or wipe the speed
dome in explosive environment. Perform the wiping and replacing accessories only
under
non-explosive environment with the provided glove.
When the speed dome is installed on wall or ceiling, the device shall be firmly fixed.
If smoke, odors or noise rise from the speed dome, turn off the power at once and
unplug the power cable, and then contact the service center.
If the speed dome does not work properly, contact your dealer or the nearest
service center. Never attempt to disassemble the speed dome yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
If the camera fails to synchronize local time with that of the network, you need to
set up camera time manually. Visit the camera (via web browser or client software)
and enter system settings interface for time settings.
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.