Ex
Explosion-proof Dome
·
Quick Start Guide
6
Connect the cable through
cable trunk or cable tray.
Junction Box
Cable Entry
Figure 2-3
Cable Wiring Diagram
2.3
Installing the Explosion-proof Dome
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
We highly recommend that before installation, you apply power to the speed dome to
test it and make sure it can work normally.
Notes:
Do not drag the speed dome with its waterproof cables. The waterproof
performance is affected otherwise.
Do not touch the bubble directly by hand. The image blurs otherwise.
All installation operations shall be performed when the speed dome is powered off.
Do not disassemble the speed dome.
2.3.1
Disconnecting the Cables
After testing the speed dome, disconnect the cables as shown in Figure 2-2.