Smart Camera User Manual
42
HardTriggerActive: hardware trigger mode
SoftTrigger: software trigger mode
Figure 3. 28
Opto-isolated output event source
The output delay time can be set in Line Out Delay, and you can set pulse duration
time in Line Out Duration according you need. When Line Out Activation Event box
is Exposure Start Active, there will be an addition Flash Ahead Time in attribute tree
which means the time before exposure.
Figure 3. 29
Opto-isolated output configuration
3.5.3
Opto-isolated Input/Output Circuit
Camera contains three opto-isolated input and three opto-isolated output.
(1)
I/O input circuit: (the input voltage 5~30 V DC)
If input device signal is NPN, the device power positive is connected to the
IN_COM and the signal is connected to the IN0/IN1/IN2, otherwise, reversal the
cable.
