Smart Camera User Manual
28
Chapter 3
Functions
3.1 Device Control
Run the client software and click Device Control from the Attribute list. You will see
the device manufacture, the model name, the device version, and so on. Input the
device name in the textfiled of Device User ID, click the button
Execute
to reset the
device, and check the sensor temperature shown in Figure 3.1.
Figure 3. 1
Device Control Settings
3.2
Reading Setting
Click Read Setting from the attributes list.
3.2.2
Object Moving Mode
The camera supports two reading modes, dynamic and static, and both support
reading multiple codes at the same time. The difference between two modes is that the
duplicated barcodes can only be filtered under the dynamic mode which requires you
to set the filter time shown as the figure 3.2.
