Figure 8-8 Motion Detection
2. Drag the block or set value to adjust sensitivity.
3. Click Modify to edit the arming schedule.
4. Click on the time bar and drag to select the time period. Click Save to save the settings.
5. Click to enable Notify Security Center.
Note
Send an exception or alarm signal to the remote management software when an event occurs.
6. Click Save to enable the settings.
8.6.12 Event Linkage
Set linked actions for events.
Steps
1. Click Configuration → Event → Event Detection → Linkage Settings to enter the page.
Figure 8-9 Event Linkage
Video Intercom Villa Door Station User Manual
56