Note
The computer and the device should belong to the same subnet.
3. Create and enter a password into the password field.
4. Confirm the password.
5. Click OK to activate the device.
4.3 Activate Device via Client Software
You can only configure and operate the door station after creating a password for the device
activation.
Default parameters of door station are as follows:
●
Default IP Address: 192.0.0.65.
●
Default Port No.: 8000.
●
Default User Name: admin.
Steps
1. Run the client software, click Maintenance and Management → Device Management → Device
to enter the page.
2. Click Online Device.
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
5. Click OK to activate the device.
Note
●
When the device is not activated, the basic operation and remote operation of device cannot
be performed.
●
You can hold the Ctrl or Shift key to select multiple devices in the online devices, and click the
Activate button to activate devices in batch.
Video Intercom Villa Door Station User Manual
11